SkyDemon
Home   |   Flight Planning   |   GPS Navigation   |   Download   |   Buy SkyDemon   |   Forums

SkyDemon Forums

Home Search Tags Calendar Who's On Members
Welcome Guest ( Login | Register )
Latest Posts Popular Topics

Home » Discussion Forums » SkyDemon Navigation » help setting on GPS Satellite "china"

help setting on GPS Satellite "china"

Posted By AWACS 11/05/2012 10:33:39
Add to Favorites1

help setting on GPS Satellite "china"

Author Message
AWACS
Posted 11/05/2012 10:33:39
Forum Member

Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)Forum Member - (28 reputation)

Group: Awaiting Activation
Last Active: 11/05/2012 15:10:11
Posts: 1, Visits: 24
28
section GPS Setup must be set up correctly in Skydemon Hardwere, the dirver I can not set them: that COM and Baud I enter to get a gps aviation and non-road?

thank you very much
Post Information
nje
Posted 11/05/2012 12:29:57
Too Much Forum

Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)Too Much Forum - (7,120 reputation)

Group: Forum Members
Last Active: Yesterday @ 08:34:03
Posts: 340, Visits: 3,583
It all depends on which GPS device you have. I have one that uses com 0 baud 9600 and another com 1 baud 57600.

It's trial and error. try starting with Com 0 baud 4800 and try each baud in turn. Then change to Com1 Baud 4800 and again go through all the baud settings until you find the correct one.

Good Luck
Post Information
stevelup
Posted 11/05/2012 17:05:32
Too Much Forum

Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)Too Much Forum - (6,980 reputation)

Group: Moderators
Last Active: Yesterday @ 23:07:57
Posts: 404, Visits: 1,603
95% of the time, it's 4800 baud and two very common COM ports are 4 and 7

So.. COM4 4800 and COM7 4800 would be the first I'd try!

The other way you might be able to figure it out is to run the car GPS software that came on your device - it might show you the settings.
Post Information

Similar Topics

Expand / Collapse

Reading This Topic

Expand / Collapse

Back To Top

Powered By InstantForum.NET 2012 © 2013
Execution: 0.109. 10 queries. Compression Enabled.